Smart switches & sensors
Lighting is where a smart home is won or lost: it must work from the wall, every time, for every guest. There are four good routes — the right one depends on how much you value local control over headline price.
The four routes to smart lighting
| Route | Example | Cost per point | Notes |
|---|---|---|---|
| Z-Wave switches | Zooz dimmer / on-off | $29.95–$31.95 (+ $69 adapter once) | Slim bodies that fit crowded multi-gang boxes, 3-way with your existing switch, fully local. The premium pick. |
| Matter-over-Wi-Fi | TP-Link Tapo dimmer / switch | $14.98–$17.99, no adapter | Cheapest reputable route — about $132 for eight switches vs about $317 for the Z-Wave route. Weigh the vendor's privacy history. |
| Zigbee switches | Enbrighten and similar | About $40 | Rides the Zigbee coordinator you already own. |
| In-wall modules | SONOFF ZBMINIR2 | $17.90 | Wires behind your existing switch — your switches and plates stay exactly as they look today. On/off only. |
For a typical eight-switch loadout the honest comparison is about $132 (Tapo) versus about $317 all-in (Zooz including its adapter, which also unlocks Z-Wave locks and sensors later). Neither answer is wrong; pretending the $185 difference buys nothing is.
Sensors that earn their place
- Presence: mmWave presence sensors (about $39.99) keep lights on while you sit still — the upgrade that makes lighting feel intelligent instead of motion-activated.
- Leak: if you already own RF leak pucks, keep them and read them locally with an RTL-SDR dongle and rtl_433 on the NAS (about $40) instead of replacing them.
- Air quality & climate: IKEA's Matter-over-Thread line is the current value benchmark — air quality about $34.99, temperature/humidity about $10–12, door sensors about $11.99.
- Smoke/CO: one listener for hardwired interconnected alarms (about $28.95) reports the whole house.
- Energy: a panel monitor like the Emporia Vue 3 ($199.99) plus smart plugs with metering for the big individual loads.
Before you buy switches
Houses built after about 2011 usually have neutral wires in switch boxes (required by code) — confirm in one box before ordering ten of anything, count how many need dimmers versus simple on/off, and check multi-gang boxes for space: slim switches and in-wall modules exist precisely because crowded boxes are normal.