Radios & protocols, in plain language
Home Assistant talks to devices over several different radios. You do not need all of them on day one — you need one good Zigbee coordinator, and the rest can follow when a device you want requires them.
The radios at a glance
| Radio | What it is for | What you need | Typical cost |
|---|---|---|---|
| Zigbee | Sensors, bulbs, plugs, in-wall modules — the workhorse | A USB or network coordinator, e.g. SMLIGHT SLZB-06MU | About $40 |
| Bluetooth | Beacons, some sensors, provisioning new devices | Small ESP32 proxy boards around the house, e.g. M5Stack ATOM Lite | About $10–15 each |
| Matter over Thread | The new cross-brand standard: locks, sensors, plugs | A Thread border router — many mesh routers (eero) and smart speakers already are one | $0 if you own one |
| Z-Wave | Premium switches, locks, and sensors with excellent range | A USB Z-Wave adapter | About $69 |
| Wi-Fi | Cameras, speakers, anything mains-powered and chatty | Your existing network | $0 |
Zigbee: buy the coordinator first
A network (PoE or Ethernet) coordinator like the SLZB-06MU beats a USB stick for most homes: place it centrally instead of wherever the NAS happens to live, power it from any USB charger, give it a fixed IP, and add it to ZHA with radio type Ember. Note that a mesh router's built-in Zigbee radio is usually locked to its own voice-assistant ecosystem — eero's Zigbee, for example, cannot be used by Home Assistant at all, which is why the separate coordinator is not a wasted purchase.
Thread and Matter: probably already in your house
If your mesh routers or smart speakers act as Thread border routers, Matter-over-Thread devices — a fast-growing, cheap category, including IKEA's current sensor line — pair straight into Home Assistant once the Matter Server container is running. Keep your Zigbee coordinator Zigbee-only; trying to make one dongle do both jobs is a false economy.
Bluetooth proxies: cheap ears
One ESP32 board per floor, flashed with ESPHome's Bluetooth proxy firmware, gives Home Assistant house-wide Bluetooth coverage for provisioning and beacons. Flash them one at a time and name them by room as you go.
Z-Wave: add it when a device earns it
Z-Wave earns its adapter cost with premium in-wall switches and with one clever trick: if your house has hardwired, interconnected smoke/CO alarms, a single listener module can report the whole string to Home Assistant. Until a device like that is on your list, Z-Wave can wait.
Next: cameras that record locally, or the build list.